新酷音輸入法 2013 安裝問題

我嘗試安裝新酷音輸入法2013在我的電腦上，我的系統是x86 windows XP + SP3，這邊寫上我遇到的問題。不知道為什麼下載網站的問題回報連結似乎沒有作用，好像也沒有人在網站上回饋。2014/2/6

我的「啟用進階文字服務」原本就是開啟的，在我安裝新酷音輸入法後我的'進階文字服務列'就消失了，也就是右下角按ctrl+space (或者其他按鍵)會切換輸入語言的小視窗就不見了，這也代表我無法輸入中文，這真的是悲劇阿，我弄了好久花了好多時間才把它救回來。新酷音的網站只說一定要開啟「啟用進階文字服務」，不然會有問題，不過我本來就有開啟，所以我也不知道為什麼，我好像有看到另一個人有同樣問題在網站上留言，不過問題似乎沒有被回答。

這邊寫上我胡搞瞎搞救回那個輸入語言的小視窗的方法，可是我不能保證有效，老實說我也不確定我救回那個小視窗的完整步驟。而且重要的是這裡只提供給大家參考，會有什麼後果不負責任的喔，只是討論一下，看看是否可以討論出個解決方法，要不然我想應該還是會有人會遇到同樣的問題。

在C:\WINDOWS\system32裡面有個檔叫做ctfmon.exe，我查了一下網路發現可能是安裝程式將這個檔案重新命名或者檔案遭到修改而無法正常運作，以下是我修正的方法，下面的步驟我各種順序都嘗試過，哈，這也是我不確定哪一步是正確的原因，也因此以下的步驟我各種順序都嘗試過不下十幾次，如果你想要試試看自己修，也請要有心理準備，多試幾次

• 開啟->執行-> sfc /scannow 讓windows執行檔案修復，然後看看ctfmon有沒有出現在system32檔案夾中。(這一步我只跑一次，需要不少時間。)
• 如果沒有，或者檔案其實存在但是不正常運作，去另一台xp電腦(輸入法是正常的電腦)拷貝一份ctfmon.exe放到你的system32檔案夾中。我就是這樣做。
• 控制台->區域與語言選項->語言->文字服務與輸入語言->細節->移除所有的中文輸入法直到只剩下英文輸入法。
• 重新啟動電腦，如果還是不正常，再去控制台->區域與語言選項->語言->文字服務與輸入語言->細節->進階->確認[關閉進階文字服務]沒有被勾選。再到system32資料夾中執行ctfmon.exe(滑鼠左鍵雙擊)。或者到工作管理員看看ctfmon.exe有沒有在背景中執行。(這一步我重複做多次)
• 控制台->區域與語言選項->語言->文字服務與輸入語言，安裝windows本身內建的舊版微軟新注音輸入法，安裝後，我的語言輸入視窗就神奇的出現了。(也是只做一次)

再強調一次，以上順序我不知道怎麼樣走才是正確的，如果你真的想試，還請試著打亂上面的順序然後多試幾次。另外，千萬別動到其他system32裡的檔案阿。補充一下，我是google "advanced text service missing corrupted ctfmon.exe"之類的關鍵字才找到一些資訊的。另外，成功了的話別忘了跟大家分享你的正確方法喔。另外，救回輸入語言的小視窗後，我就不敢再安裝新酷音輸入法了，目前還在找好的輸入法中。

直立傳統弦敲擊式鋼琴的維修

http://www.danpiano.com/pdfs/Replacement-of-Worn-Asian-Style-Hammer-Butts-and-Flanges.pdf

零件英文名稱可在此網站查到(字有點模糊但還可以分辨)
http://www.dest.com.tw/web001/products-view.asp?product_id=73#

Discussion group
http://my.ptg.org/Communities/ViewDiscussions/ViewThread/?GroupId=43&MID=239315

Broken cord will give a metallic noise and loose touch, see here
http://www.pianoworld.com/forum/ubbthreads.php/ubb/showflat/Forum/3/topic/004648/Number/0/site_id/1#import

Below is quoted from Pianoworld.com: (I believe the original is provided by Wayne Walker)

Cord Replacement Procedure:
1. Place action in cradle; remove hammer rest rail and treble bracket.
2. Reverse action so that hammers and dampers are facing you.
3. Loosen hammer butt plate screws.
4. Remove hammer assemblies from flanges and let hang from bridle wires; keep them in order to avoid tangling.
5. Straighten any bent return springs.
6. Tighten all wippen flange screws.
7. Tilt action toward you 90° so that the hammer flange cord slots face upward.
8. Tighten remaining flange screws.
9. Using specially adapted shimming chisel or other suitable tool, clean slots (no solvent) and vacuum up debris.
10. Wrap 90+ turns on dowel with new cord and cut turns with a razor.
11. Glue one end of each piece to one slot on each flange.
12. Return to first flange and glue the other ends to remaining slots; check with gauge.
13. Lubricate damper spring slots.
14. Replace hammers; tighten butt plate screws; hook springs under flange cords as you go.
15. Replace hammer rest rail bracket and reinstall rest rail.
16. Final check: jack springs engaged with jacks, spring cords in crook of hammer return springs, bridal tapes not twisted.


Tools and Materials:
__flange, thin-bladed, and Phillips screwdrivers
__spray lube and spring hook (for damper springs)
__shimming chisel modified to clean flange slots, or other suitable tool
__glue applicator (syringe) filled with Tightbond & damp rag
__action cradle
__replacement cord, e.g., braided Dacron of suitable diameter (kite string, parachute cord) or silk cord (Pianotek)
__9/16" dowel [turned down from 5/8" dowel] or suitable width piece of cardboard
__blunted scriber (or use small screwdriver, to help place cords in slots)
__gauge (dowel, sized to fit intact flange cord, with end rounded off, to check loop size)
__razor
__forceps

Many different types of cord will work. White braided Dacron looks the best and will last forever. Joe Goss suggests Spider Wire which I've bought but haven't tried yet. It's a similar color to the stuff you're replacing so that tends to go against using it. I used to use squidding line but the kind you'll likely find in fishing supply places is waterproofed and wouldn't take well to Tightbond. Probably the easiest (and possibly cheapest) is to order the silk action cord from Pianotek ($3.95 for a 30-yard roll).

Cleaning out the slots is not critical and you could even give the flanges a quickie scrub and vacuum treatment and commence with step 10.

This method is taken from Tom Driscoll who posted it to the list in May, 2002 (Yamaha Upright Hammer Flanges).

_________________________
Wayne Walker
Walker's Piano Service
http://www.walkerpiano.ca/

超好笑的香港遊記 [轉錄] - 終極路痴香港行Day1(上)

by 巴毛 原文請見  http://talkchick13.pixnet.net/blog/post/101447745

文字版 http://www.ptt.cc/bbs/Hong_Kong/M.1383565604.A.D67.html

網路上計算一定天數後是幾月幾號的程式

對計算只能待一定天數的入境簽證有不少幫助
如：短期停留簽證，居留簽證
可以計算最晚要出境的日期
不過請留意是否從入境的第一天開始算 或是 從入境後的第一天開始算
另外 還是要多方查證計算結果
畢竟逾期出境是要罰很多前前低
http://cgi.cs.duke.edu/~des/datecalc/datecalc.cgi

A miniature model of a gokart made of wood

A simple small kart model made of wood, and videos I made to illustrate the structure of a simple kart/go-kart. This is to show how a kart can lift one of the front or rear tires when it steers. This is because the plan of rotation of the front axial is not horizontal but tilted. During acceleration/deceleration the weight of the car can shift to back/front side making the outer front/inner rear tire lift. In the latter case (inner rear case) this helps the car to corner because a simple kart does not have differential on the rear axial or on the two rear tires. Normally when a kart corners the two rear tires will tend to rotate at different speed because the radius of their traces is different (the inner tire has a smaller radius and so smaller circumference.). This means the two rear tires have to rotate at different speeds, but they can not because they are on the same axial. This means during cornering one of the rear tires will always suffer friction, and thus slow down the car. Unless, one of the tire is lifted, not touching the ground! Hence the idea to make the structure so that one of the tires can be off the ground during cornering. See the cornering in action in the video below.

Two cases: 1) inner-rear lift, 2) outer-front lift.

提琴用的動物膠水 - 物理性質簡介與如何自己作 (英文資料)

請參考(英文版)
https://www.violins.ca/info/hide_glue_preparation.html

買原料
https://www.violins.ca/supplies/hide_glue.html

Secondary ion mass spectrometry 次離子質譜學 與 Cameca NS50

二次離子質譜術與超淺接面分析
奈米通訊 (中文)
潘扶民-國家奈米元件實驗室

http://www.ndl.narl.org.tw/cht/ndlcomm/P5_3/8.htm

Cameca SIMS instruments overview.

Cameca NanoSIMS 50 booklet.